Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNIOS II and Cyclone III Remote Update
Have spent several days now searching and reading and think I am nearly there... but not quite. I am using the NIOS II core with SOPC builder. I use Quartus II for the FPGA image. This is a projec...
Altera_ForumHonored Contributor
Honored ContributorJust to be sure I well understand, in the remote update core you've the boot address
(using IORD to read remote update register like 0x04 to read the boot address) that only refers where the address of FPGA configuration image is situated by default 0. Address of FPGA configuration image that can be changed with the bootloader code (EPCS_boot_rom.hex) ?
