Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

NIOS II and Cyclone III Remote Update

Have spent several days now searching and reading and think I am nearly there... but not quite. I am using the NIOS II core with SOPC builder. I use Quartus II for the FPGA image. This is a projec...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

just have another question : why after reconfig command register 4(boot adress) = IORD(REMOTE_UPDATE_BASE, 0x04) = 8 ?

while the bootloader in my second sof is pointing to the firmware at 0 if I use the original bootloader code without modification.

So my register 4 shouldn't contain the value 0 ?