Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNIOS II and Cyclone III Remote Update
Have spent several days now searching and reading and think I am nearly there... but not quite. I am using the NIOS II core with SOPC builder. I use Quartus II for the FPGA image. This is a projec...
Altera_ForumHonored Contributor
Honored ContributorOk I opened the new epcs_flash_boot_controller.hex file in quartus and
in Quartus process menu -> Update Memory file worked, however to start assembler what do I have to do ? I have none idea !
