Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Need help! Weird CycloneII LED assignment problem!

Hey guys, My pins on board don't work as what they should do according to pin assignment. In my design entity, I have outputs LEDR0, LEDR1... LEDR5. I assigned them to correct LED pins, no...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Yes I have a DE-2. and LEDs are active high. I checked fitter pin out file, pin at location for R7 is set to GND. Since I actually don't have a pin as R7, I don't know how to drive it to GND......