Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNCO 8.1 Problem
HI, no matter what output freq. I set my NCO to have it is always coming out at 20 Mhz, or this is what I am measuring on the scope. I don't think this was happening when i was using quartus 6....
Altera_ForumHonored Contributor
Honored ContributorClock is 100MHz, NCO is just 1Mhz, i have tried various different NCO freq. and is coming out as 20Mhz everytime.
I have just got a random 32-Bit phi_inc_i input.
