Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Memory usage for the RAM port 2

Hi, I had a common question regarding the Megawizard ram port 2 memory usage. The device use was stratix II. When i create the Megawizard, i choose two read/write ports on the first page. ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi thepancake,

I figure out RAM to be configured into 2048 x 4 mode is actually the port width configuration. And with one ram there are x4 width of the data bus. thus to make x18 we will need five x4 RAMs to be used.

thanks

correct me if i were wrong,

best regards

kenny