Forum Discussion

ken_51's avatar
ken_51
Icon for New Contributor rankNew Contributor
2 years ago

MAX10:UFM Parallel Read Timing Details

Device MAX10 10M02SCE144 Environment Windows 11/Quartus Prime Lite 17.0/ModelSim ALTERA STARTER EDITION 10.5b I am using Altera On-Chip Flash IP and want to read data from UFM in parallel, incremen...
Fpga Devkit
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi ken_51,

After re-checking the document, I realized that I may have overlooked something earlier. It is indeed expected behavior due to the significant gap between the maximum frequency for all devices in parallel mode, which is 116 MHz, and the 10M02 device, which only supports up to 7.25 MHz. This aligns with what FvM mentioned above.

Regards,

Fakhrul