Forum Discussion

jjang's avatar
jjang
Icon for New Contributor rankNew Contributor
2 years ago

[MAX10] when Boot (CFM0) All IO port High → All port Low

as i know All FPGA have configuration Time. During Configuration Time, All IO port weak pull up(100kΩ ~ 1MΩ) → All IO port High. Can i change Pull-up → Pull-Down? using Max10 Settings? * My FPGA ...
Configuration
NazrulNaim_Intel's avatar
NazrulNaim_Intel
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi,

As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending.

Regards,

Nazrul Naim