Forum Discussion

HSuzu16's avatar
HSuzu16
Icon for New Contributor rankNew Contributor
5 years ago

[MAX10] some I/Oport driven Low when Jtag Programming

Hi, I use MAX10 [10M16SCU324C8G　supply3.3V] FPGA in our design. While writing .pof, some user I/Opin is driven low. (ISP-CLAMP is disabled. USB-Blaster Rev.c is used.) The user I/Opin (input sett...
DPB1's avatar
DPB1
Icon for New Contributor rankNew Contributor
3 years ago

Hi,

I have the exactly the same problem with the 10M16SAU324.
I use Quartus 21.1 Lite

Do you have a fix for that ?

David