Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributormax10 adc sample point
hi everyone: i try to use max10 on chip adc to sample a image sensor output. the frequence is 1MHz. i need to know when the max10 on chip adc switch from sample to the hold mode. in most...
Altera_ForumHonored Contributor
Honored Contributori use my method to test the sampe point on MAX10_10M08_Evaluation_Kit,
the result shows in sample_point.jpg be careful, it is 5*clock_clk not 5* adc_pll_clock_clk! the test condition is: 1. only use adc channel 1 2. 1MHz speed as follows: http://www.alteraforum.com/forum/attachment.php?attachmentid=12960&stc=1 http://www.alteraforum.com/forum/attachment.php?attachmentid=12961&stc=1
