Forum Discussion
ASidd16
New Contributor
New ContributorMAX10 ADC problem
Hello Everyone. I'm using MAX10 FPGA(10M08DAF484C8GES) with bemicro max10 board. I followed a lab for ADC with Quartus version 14.1 and the ADC is working but not in loop, for example when i give A...
SreekumarR_G_Intel
Frequent Contributor
Frequent ContributorMax10 do support the internal RAM of M9K block , here is the user guide for the same ; iam not sure why you are gtting error while using the RAM
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/ug_m10_memory.pdf
About the ADC core , can you check IP setting is for contionous sampling mode ?
Thank you
