Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorMAX10 ADC & GPIO restrictions
I was combing through the hand book and found that using the ADC feature on the Max 10 parts dramatically cuts your available I/O, especially on the E144 package. In fact, and I was shocked by this, ...
Altera_ForumHonored Contributor
Honored ContributorHi, there are some io guidelines posted when you are using the ADC block. You can refer to the ADC restrictions here
https://www.altera.com/en_us/pdfs/literature/hb/max-10/ug_m10_gpio.pdf
