Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorMAX10 ADC & GPIO restrictions
I was combing through the hand book and found that using the ADC feature on the Max 10 parts dramatically cuts your available I/O, especially on the E144 package. In fact, and I was shocked by this, ...
Altera_ForumHonored Contributor
Honored ContributorJust tested with the eval kit (10M08 144pin part), and Quartus v14.0.2 does not enforce GPIO (non)placement in the areas mentioned.
The Altera eval kit has bank8 populated with I/O for LEDs, DIP switch and user button which all work fine with ADC enabled. Not sure what the impact in ADC accuracy might be, if I get around to measuring this will update with my findings.
