Forum Discussion
Martin57
New Contributor
New ContributorMAX10 10M04 Flash Problems
We are using the 10M04SCE144C8G. After about 1 year in the field, we now have already 2 returns from our customer -- "FPGA not booting". When reading out the actual flash-content, we could see 1 sect...
Martin57New Contributor
New ContributorHi John,
JTAG is not connected under this condition, and yes, the IP-Core is implemented. An accidential access from User-Level seems highly unlikely, and on System-Level there is only code for "bulk-erase". In my case, there are only a few Bytes (one sector?), erased to 0xff.
Regards Martin
Martin57New Contributor
New ContributorHi John,
in case, it would be helpfull for you, I attached the original and the readout-file
