Forum Discussion

James44's avatar
James44
Icon for New Contributor rankNew Contributor
2 years ago
Solved

MAX10 10M04 - Not enough logic elements to use the ADC block?

Hi - I'm new to FPGA programming. I'm using the MAX10 10M04SAE144I7G on a board I made. I've gotten as far as programming it to blink LEDs and read pushbuttons now I'm trying to read an analog signal...
Configuration
  • ShengN_altera's avatar
    ShengN_altera
    2 years ago

    Hi,


    Try to set the bdf file adc4.bdf to other name.


    Thanks,

    Regards,

    Sheng


FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 years ago
The basic ADC block needs about 480 LE, less than 1/8 of 10M04 capacity. It's apparently not the ADC IP as such but other stuff that's consuming the logic resources in your design.