Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Max II CPLD DEV_OE and DEV_CLRn

I'm using MAX-II(EPM1270) CPLD and Here is my question: How these CPLD DEV_OE and DEV_CLRn pins are asserted and deasserted ?? I red in MAX-II Data sheet that an option has to be set before ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

The settings can be set in Assignments/Device/Device and Pin Options. It can be found intuitively without reading the Quartus Handbook, I think. (Although the Handbook is always an option).