Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorMAX 10: using two ALTPLL
Is it possible using two ALTPLL from one clock source with 10M08D? I tried instantiating two PLLs. One has 5 clocks, and the other one has one clock. But I got an error message during synthesizi...
Altera_ForumHonored Contributor
Honored ContributorHi,
1.Have you checked how many PLL available in you device/FPGA? This error say it all you device support only 1 but you are using 2 PLL. To solve you can change the device in you project. Let me know if this has helped resolve the issue you are facing or if you need any further assistance. Best Regards, Anand Raj Shankar (This message was posted on behalf of Intel Corporation)https://www.alteraforum.com/forum/attachment.php?attachmentid=14886 https://www.alteraforum.com/forum/attachment.php?attachmentid=14887 https://www.alteraforum.com/forum/attachment.php?attachmentid=14888
