Forum Discussion

EGrin3's avatar
EGrin3
Icon for New Contributor rankNew Contributor
6 years ago

MAX 10 (10M08SAE144) ADC: Vref at 2.5 V, and VCC_ONE at 3.3 V

Hi, Table 34 (ADC Performance Specifications for Intel® MAX® 10 Single Supply Devices) in the MAX 10 FPGA Device Datasheet specifies an external reference voltage (Vref) for the ADC from (VCC_ONE - ...
EngWei_O_Intel's avatar
EngWei_O_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Thanks Erik for your inquiry.

Do you mean you have the measurement of Vref and Vcc_one from the "MAX 10 10M08 Evaluation Evaluation Kit"? Or you found discrepancy on the user guide doc versus the datasheet doc?

Regards

Eng Wei