Forum Discussion

akashgupta's avatar
akashgupta
Icon for New Contributor rankNew Contributor
3 years ago

Linux not Booting on custom Intel Cyclone V board

Hello, I was trying to build Linux file system from scratch for my custom Intel Cyclone V (5CSXFC6C6) board so I followed this (Embedded Linux Beginners Guide | Documentation | RocketBoards.org) gui...
Configuration
mabdrahi's avatar
mabdrahi
Icon for Contributor rankContributor
3 years ago

Hi Akash,


Let me know if you back from holiday,


Thank you,

Aliff


  • akashgupta's avatar
    akashgupta
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi, I am back to work. I am trying to compile recording of commands as requested by you.

    Meanwhile, I tried preparing sdcard using the u-boot-with-spl.sfp you have provided in the qspi zip and it didn't work. I request you to please describe all the pins and switch configurations for the Arrow SoCkit. I am using Rev D of ArrowSoCKitEvaluationBoard this board. Please check the board and make sure we are using same hardware.

    I also request you to burn the image I have provided in the previous reply and tell me if it works for you.

    Thanks,

    Akash.

    • mabdrahi's avatar
      mabdrahi
      Icon for Contributor rankContributor
      3 years ago

      Hi Akash,

      Thank you for the update. I'll test your image on our hardware, but I've discovered faulty on

      my board. I'm currently looking for a replacement board for the image you provided.

      Thank you,

      Aliff

      • akashgupta's avatar
        akashgupta
        Icon for New Contributor rankNew Contributor
        3 years ago

        Hi, Please find the photos of the dev board I am using for your reference.