Forum Discussion

TWadu's avatar
TWadu
Icon for New Contributor rankNew Contributor
5 years ago

LDPC IP Core Simulate has no output

I use LDPC IP Core for 802.11n decoder in Quartus Prime Pro 19.1, however , when I give some input data and control signals there is no output? ​I find when reset_reset_n signal turn to high level ,...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,

Thanks for highlighting this. This seems weird. I have managed to replicate similar observation as yours when I tested with S10 LDPC in Q19.4Pro. I have tested with WiMedia 1.5 mode and seems to observe output = 0 as well. I have file a case to Factory to seek further clarification.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin

TWadu's avatar
TWadu
Icon for New Contributor rankNew Contributor
5 years ago

​Hi,

I wonder if there is any progress on this issue.Thank you!