Forum Discussion

TWadu's avatar
TWadu
Icon for New Contributor rankNew Contributor
6 years ago

LDPC IP Core Simulate has no output

I use LDPC IP Core for 802.11n decoder in Quartus Prime Pro 19.1, however , when I give some input data and control signals there is no output? ​I find when reset_reset_n signal turn to high level ,...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

Thanks for highlighting this. This seems weird. I have managed to replicate similar observation as yours when I tested with S10 LDPC in Q19.4Pro. I have tested with WiMedia 1.5 mode and seems to observe output = 0 as well. I have file a case to Factory to seek further clarification.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin

  • TWadu's avatar
    TWadu
    Icon for New Contributor rankNew Contributor
    6 years ago

    ​Hi,

    I wonder if there is any progress on this issue.Thank you!