Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorJTAG Programing Cyclone III device
Hello, I`m new in developing boards with Altera, thus i tried to develop the simplest design: just Cyclone III, and a few leds. I`m going to program it with Usb blaster via JTAG, but when ...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- I`m going to program it with Usb blaster via JTAG, but when i`m starting programing in Quartus programmer it fails... --- Quote End --- What exactly "fails"? Do you get any error messages by the programming tool or does programming work without error messages but the HDL design does not work? In my case the programmer failed with the simple message "Failed" and no further information. I found out that in my case the network firewall blocked the programmer from accessing the "Altera JTAG server" service (which must be installed and running, too) ... Martin
