Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Jtag problem

Here we go again! For a very simple project i used a MAX7032S. Suggested pullup an pulldown are used at jtag pins, connections kept as short as possible and large ground path as well. Only way...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi, FvM

All of Vcc connecting JTAG pullup resistor and the device are 5V in my board.

For pogramming the device, does Vcc connecting JTAG pullup resistor change to 12V?

Vcc of the device is 5V.

Thank you.