Forum Discussion

Balamurugan_V's avatar
Balamurugan_V
Icon for New Contributor rankNew Contributor
5 years ago

JTAG Detection Problem in MAX7000AE

Hello all, I m using EPLD max 7000A series(EPM751AEBI256-7)device . I am programming the device using USB Blaster REV C in Quartus II version 13.0.It shows the following errors. NOTE: TDI and TMS...
Balamurugan_V's avatar
Balamurugan_V
Icon for New Contributor rankNew Contributor
5 years ago

NOTE : sorry the part number is EPM7512AEBI256-7 in MAX 7000AE series.

  • ak6dn's avatar
    ak6dn
    Icon for Regular Contributor rankRegular Contributor
    5 years ago

    Those pullup/pulldowns should be ok.

    Are you sure your 10p JTAG connector pins are wired correctly to the MAX devices?

    I use a TerAsic USB Blaster clone on a test board I designed with a 10p JTAG connector and EPM7064S-PLCC44 and EPM7128S-PLCC84 devices and have no JTAG issues with QuartusIIweb 13.0sp1.