Forum Discussion

MYoha's avatar
MYoha
Icon for New Contributor rankNew Contributor
6 years ago

JAMPLAYER for ARM

Hi, We have a customer running into jamplayer error ('syntax error') message. They are running it after porting to ARMv8 (64-bit). Error message attached. Are there additional steps required ...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,


It should be similar but you can try to see if you are observing the issue. Are you using blaster to configure the device or Arm GPIO to directly configure it? If you are using USB-Blaster then you can try using Quartus Programmer Standalone Toolkit.


  • MYoha's avatar
    MYoha
    Icon for New Contributor rankNew Contributor
    6 years ago

    Hi,

    The customer is trying to configure through ARM GPIO