Forum Discussion

VMich4's avatar
VMich4
Icon for New Contributor rankNew Contributor
6 years ago

I've a problem with PCIe in Arria10. Сoreclkout_hip = 0!

We have developed a module with installed FPGA Arria 10. FPGA - 10Ax022E4F29i3. In the project we use IPCore Pcie (HardIP). Refclk (100MHz) is detected inside FPGA (SignalTap "sees"). But on the outp...
VMich4's avatar
VMich4
Icon for New Contributor rankNew Contributor
6 years ago

we tried different varients for npor and perst... it doesn't works. And this poject on Altera KIT (Arria 10 GX115) works!

STP used diff. freq - 100 ref_clk from input, 62,5 MHZ from other pin. nothing.... And reset_status = 1!!