Forum Discussion

JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

I am working with the cyclone V device.Currently i am processing the lvds signals.

The major problem is, i cannot route the input lvds signal between the input to the LVDS_RX IP and input to the lcd externally connected at the same time.Either as input to the lcd or IP is possible...
JGeor12's avatar
JGeor12
Icon for New Contributor rankNew Contributor
6 years ago

Hi But i cannot include the output of LVDS_TX ip in signal tap.It is showing the fan out problem.

JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

You should signal tap on the parallel interface (not the serial interface) i.e. output of LVDS RX or input of LVDS TX.