Forum Discussion

lidongyang's avatar
lidongyang
Icon for New Contributor rankNew Contributor
2 years ago

how to use ARM cortex in Agilex FPGA

Hi, I wonder to know how to use ARM cortex A53 cluster in Agilex FPGA: 1. how to instantiate ARM cortex in Quartus, (I only find NIOS II core in IP catalog, but no ARM cores in Quartus) 2. if the...
Configuration
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi


You will need to add in the HPS IP in the Platform designer.


The HPS stands for the Hard Processor System that would need to be added to the project.

You could see more information below:

https://www.intel.com/content/www/us/en/docs/programmable/683581/21-3/introduction-to-the-hard-processor-system-05227.html


You could also download the GSRD for the Agilex developmnent kit that have already created and tested to be working.

The GSRD could be the first step for you to explore what settings that you are working at.

You could take a look at the link below for the Devkit that you are using. Take note on the tile of the devkit too.

https://www.rocketboards.org/foswiki/Main/GettingStarted


Regards

Jingyang, Teh