Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

How to program EPCQ with .jic file on Altera C5EFP board?

I use C5EFP board, https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-e.html I program the EPCQ with jic file, get Error (209025): Can't recognize silicon ID...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Dear Sir,

I am confused with the .jic file programming to a Cyclone V E FPGA Development Kit.

How can people program a .jic file to the EPCQ device on a Cyclone V E FPGA Development Kit? Are the following steps correct?

1. Design a project which includes EPCQ controller?

2. Remove resistor R16 and R22, populate resistor R18 and R23?

3. Set MSEL to 10011?

4. Connect a USB blaster cable?