Forum Discussion

New Contributor

2 years ago

How to install device Stratix IV in Quartus Pro23.4

For my project, I need use Quartus Pro because fully support of SystemVerilog, but I have a TR4 (Stratis IV) Platform for test my design. How I can install Stratix IV device?

Configuration

Artemisa

New Contributor

2 years ago

Hello, MARS2!

There are some devices only available for Quartus Prime Pro edition. You could see the one supported by:

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-software/devices-support.html#intel%C2%AEstratix%C2%AEseries

Unfortunately, for the device you are currently using, only the Quartus Standard edition is available.

Forum Discussion

How to install device Stratix IV in Quartus Pro23.4

Recent Discussions

Max 10 Boundary Scan Discussion

EP4CE22F 256 net length report not found

Arria 10SX current drawn during non-volatile key programming

URGENT SUPPORT FOR FMD DATA COLLECTION

Cyclone V SE Pulldowns on QSPI I/F. Why?