Forum Discussion

jhong28's avatar
jhong28
Icon for New Contributor rankNew Contributor
5 years ago

How to control rising/falling time, sampling time of GXE Transceiver?

Pleas help me. I am trying to combine a transmitter to a receiver of GXE transceiver to drive and receive data from or to DUT. To implement this thing, I need three information, first is how to contr...
jhong28's avatar
jhong28
Icon for New Contributor rankNew Contributor
5 years ago

I want to combine transmitter with receiver, and need to control transmitter output with high-Z when some data is being received. how to make transmitter with high-Z? this is my fist question.

the second qustion is how to control the timing of driving and receiving on tranceivers by myself.

Thanks a lot.

jhong28's avatar
jhong28
Icon for New Contributor rankNew Contributor
5 years ago

Hi,

I got additional information in the user manual " ug_etile_xcvr_phy ".

I have questions on table 13.

I wnat to use a tranceiver on Duplex mode, but dependently, which means if receiver enable, trasmitter and Ouput disable, and some time later if transmitter and enabled, receiver disabled.

if i change attribute data from 0x0002 to 0x0005, is that correct?

After changing attribute data, any training is needed?

Thans a lot.