Forum Discussion
KMour
New Contributor
New ContributorHow do I determine which I/O PLL phase a DPA receiver has locked to?
I'm working with a design that involves a 10CX220YU484E5G receiving data from four devices over LVDS interfaces. All four devices that we're receiving data from are the same part, and one crystal pro...
EngWei_O_Intel
Frequent Contributor
Frequent ContributorHi Kyle
You can refer to "5.6.5.1.1. DPA Block" in the handbook below:
https://www.intel.com/content/www/us/en/programmable/documentation/sam1403483633377.html#sam1403482372383
Thanks.
Eng Wei
