Forum Discussion

KMour's avatar
KMour
Icon for New Contributor rankNew Contributor
6 years ago

How do I determine which I/O PLL phase a DPA receiver has locked to?

I'm working with a design that involves a 10CX220YU484E5G receiving data from four devices over LVDS interfaces. All four devices that we're receiving data from are the same part, and one crystal pro...
EngWei_O_Intel's avatar
EngWei_O_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Kyle

The DPA of the receiver will select the clock with correct phase automatically and it is depends on the configuration of the receiver IP that we have selected.

We shall validate the output of the receiver if correct output bits are received.

Thanks

Eng Wei