Forum Discussion

EEren's avatar
EEren
Icon for Occasional Contributor rankOccasional Contributor
2 years ago
Solved

FPGA doesn't run after pof file programming.

The chip - MAX10M50SAE144. When I program sof file - it runs OK. When I program pof file - it doesn't run. nCONFIG - pull-up, CONFIG_SEL - pull-down, CONFIG_DONE - pull-up. What could be a problem?...
Configuration
  • FakhrulA_altera's avatar
    FakhrulA_altera
    2 years ago

    Hi EEren,


    I wish to follow up with you on this case. Do you still have further inquiries on this issue? Please feel free to let me know if there is any concern so that we could further assist you.


    Regards,

    Fakhrul



FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi EEren,


I wish to follow up with you on this case. Do you still have further inquiries on this issue? Please feel free to let me know if there is any concern so that we could further assist you.


Regards,

Fakhrul



EEren's avatar
EEren
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Thank you.