Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

FGPA clock problem

Hi,

I designed a Cyclone IV EP4CE6E22N board and i used a 65 mhz crystal for clock input.

But Jtag Cable not found the device. Should I change crystal to 50 mhz one?

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    9 years ago

    No - that won't be the problem. Providing you have powered the device correctly you should be able to detect the device via JTAG. You don't need any clock source.

    Cheers,

    Alex