Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Fast POR on Cyclone 3

Hi, The databook for the Cyclone 3 indicates that by driving various combination of Vcc/GND on msel pins I can select between fast POR (power on reset) and standard POR times. Are there any des...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I think I've found at least a partial answer to the question. In www.altera.com/literature/an/an466.pdf it is stated that the voltage supply ramp times have to be according to the setting for the POR times. See Table 8 on page 28 of the linked document (version 1.1).