Forum Discussion

Contributor

5 years ago

Example of Arria10 1588 design to restore an 1PPS when working as the slave device

hello all, Our Arria10 GX is 10GE port, we need A10 work as "the 1588 slave" device to restore an exact 1PPS signal from the peer side 1588 Golden Master device. Is there an example for this scena...

SengKok_L_Intel

Regular Contributor

5 years ago

In the Arria 10 1588 example design, there is a pulse per second block, and it has an output signal for PPS. In a complete 1588 example, it has to run with CPU and software stack.

The AN739 in the following link may be helpful to you.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an739.pdf

Have a nice day.

Regards -SK

Forum Discussion

Example of Arria10 1588 design to restore an 1PPS when working as the slave device

Recent Discussions

Avalon-ST configuration with Agilex 3 fails

Cyclone IV E – PLL Power Track Width Recommendation Clarification

JTAG Chain Broken on Agilex 7-I Dev Kit

Question

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required