Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Enpirion

Hello! I use the chip supply Enpirion EN23F0QI and EN2360QI. Recently, I found a site Altera datasheet, which says: Not Recommended for New Designs. What does it mean? These chips will no longer prod...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

The most amazing thing that the site is no chip EN23F0QI Altera and its analogue. And there is no chip supply 15 amps. No chips with an input voltage up to 14 volts. If the chips EN23F0QI and EN2360QI outdated, it would be logical to see the new chip-like. So I conclude that they had problems with the development of the chip, and they decided to abandon these chips at all.

I have a situation already burned about 5 chips EN23F0QI. Basically this happens when you turn on. The load on the output of the chip about 4 Ampere. Everything is done according to the datasheet. Maybe you can tell what I'm doing wrong?

Thank you