Forum Discussion

RicardoC's avatar
RicardoC
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Enabling HPS JTAG on DK-DEV-AGI027RBES

Hi, The HPS JTAG signals of the Agilex7 device on the DK-DEV-AGI027RBES are directly connected to the MAX10 device. They have been properly setup within Quartus following the IO assignment provided ...
Generic Io
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi Ricardo


It is a new image for the MAX10 device that will bridge the HPS JTAG to the JTAG chain.

In the documentation there are instruction on flashing the new MAX10 image and you see the HPS JTAG on the jtag chain.


Regards

Jingyang, Teh