Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Documentation discrepency for MAX10m50 pin outs

Hi All, I am designing a board with a MAX10m50SCE144. I downloaded the Excel pinout spreadsheet which shows CLK0n and CLK0p on pins 25 & 26 and CLK1n and CLK1p are on 27 & 28. But in the Quartus...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi Vikas,

I worked on the project yesterday and noticed that the pin planner display has changed. It now matches the Excel spreadsheet. I don't know what has happened, but the two sources are now in agreement. Several times before yesterday, the clock pins in bank 1B (of the MAX10m50SCE144 were shifted down by one pin so the first falling clock signal was located on pin 26. I wish I'd taken a screen capture, but hadn't.

Thanks,

Scott