Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorDo MaxII devices verify flash contents before configuring at power on?
In FMEA analysis of a board using a MaxII CPLD the question came up, do the MaxII devices perform some kind of CRC or checksum check on the configuration flash (CFM) contents before configuration? In...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- You could answer ALTERA via a service request (I'm interested in the response too ;-) ). --- Quote End --- We'll see, I made a service request. Regarding FPGAs, at least Cyclone III documentation seems to indicate there is some kind of error checking during configuration but again the details aren't included.
