Forum Discussion
New ContributorCyclone2の絶対最大定格
If you refer to Cyclone II Handbook, under DC Characteristics and Timing Specifications page 5-1, it mentioned that condition beyond the absolute ratings will cause permanent damage to a device. These are stress ratings only. Functional operation at these levels or any other conditions beyond those specified in this chapter is not implied. Additionally, device operation at the absolute maximum ratings for extended periods of time may have adverse effect on the device reliability.
Regular ContributorIf you refer to Cyclone II Handbook, under DC Characteristics and Timing Specifications page 5-1, it mentioned that condition beyond the absolute ratings will cause permanent damage to a device. These are stress ratings only. Functional operation at these levels or any other conditions beyond those specified in this chapter is not implied. Additionally, device operation at the absolute maximum ratings for extended periods of time may have adverse effect on the device reliability.
FvMSuper Contributor
Hi,
Notes to Table 5-1:
"During transition, the inputs may undershoot to –2.0 V for input currents less than 100 mA and periods shorter than 20 ns."
