Forum Discussion

ShivaKi's avatar
ShivaKi
Icon for New Contributor rankNew Contributor
2 years ago

Cyclone V part number 5CEBA7F27C8N

Hello, In the Cyclone V part 5CEBA7F27C8N, please provide below inputs 1. The slew rate given in datasheet is mentioned as HIGH or LOW, could you provide the slew rate value for HIGH and LOW. 2. D...
Configuration
AqidAyman_Altera's avatar
AqidAyman_Altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hello,


For Q1, is this for output pin? Can you point to us the link that mentioned High and Low slew rate in the datasheet?



  • ShivaKi's avatar
    ShivaKi
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hello,

    Q1 is regarding Output pin. For example, the FPGA pin configured as output pin and its slew rate can be programmed as Slow(0) and Fast(1).

    Reference Document: CycloneV Device Handbook Volume 1: Device Interfaces and Integration, Table 5-24: Summary of Supported Cyclone V Programmable IOE Features and Settings

Recent Discussions