Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Cyclone III Configuration

I have developed a custom board using Cyclone III (EP3C16E144C8) FPGA. I am using JTAG for programming and debugging purpose. I have attached the schematics for the configuration pins. The ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

gotcha .. i ve to ground the pin instead of leaving it floating

i did it and issue was solved

thanks :D