Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Cyclone III configuration problem with Active Parallel flash

Hi, All, I've trying to store mt configuration and code data in an external flash, via Active Parallel interface. Using the Flash Programmer, I'm able to burn the .flash file to the external fla...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

After you change the reset address, be sure you regenerate everything: generate the SOPC/QSys component, recompile the Quartus project, re-generate the BSP, compile it and compile your application.

did you check with the memory map that you indeed placed the software outside the area used by the FPGA image?