Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorCyclone 3 migration from EPCS64 to EPCS128
Hello all, In our design, we are using successfully the EP3C10 and EPCS64 configuration device (AS mode). We need to switch to the 128Mbit device (EPCS128); the FPGA fail to config in that case:...
Altera_ForumHonored Contributor
Honored ContributorYes, we've opened a service thread on this issue with Altera.
So far they tell us is that it should work and it have been tested with Cylcone III (no details about which device exactly).
