Forum Discussion

rameshasp's avatar
rameshasp
Icon for New Contributor rankNew Contributor
2 years ago

cyclone 10 GX part number is 10CX085YU484E6G programmer tool and setup details

Can you please support and provide the details/documents for below queries: Currently we are using cyclone 10 GX part number is 10CX085YU484E6G, for this we have installed Intel® Quartus® Prime Soft...
Configuration
NazrulNaim_Intel's avatar
NazrulNaim_Intel
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hello,


Sorry for the delay. To start debug, we need more information from you:


  1. have you change the USB Blaster II programming cable and see if this can solve the issue?



Best regards,

Nazrul Naim


  • rameshasp's avatar
    rameshasp
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hi Nazurl Naim,

    I have changed the cable and tried but the error is same.

    Can you please provide the any document/steps to solve this issue.


    Also please recommend reference evk board purchase link and tool details.

    Thanks in Advance.