Forum Discussion

rameshasp's avatar
rameshasp
Icon for New Contributor rankNew Contributor
2 years ago

cyclone 10 GX part number is 10CX085YU484E6G programmer tool and setup details

Can you please support and provide the details/documents for below queries: Currently we are using cyclone 10 GX part number is 10CX085YU484E6G, for this we have installed Intel® Quartus® Prime Soft...
Configuration
NazrulNaim_Intel's avatar
NazrulNaim_Intel
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hello,


First, can you share the error message from the Quartus.


Best regards,

Nazrul Naim


  • rameshasp's avatar
    rameshasp
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hello Nazrul Naim,

    Thanks for your reply,

    1. Below is the attached error log screenshot for reference.

    2. After that we measured TDO and TDI signal from the JTAG connector with pressing continuously Test_JTAG Chain button using JTAG Chain debugger Menu. Attached screenshot for reference

    • rameshasp's avatar
      rameshasp
      Icon for New Contributor rankNew Contributor
      2 years ago

      Can you please provide me the solution for the above error.

      Thanks in Advance.