Forum Discussion

KeeganJ's avatar
KeeganJ
Icon for New Contributor rankNew Contributor
2 years ago

Cyclone 10 GX FPGA Configuration Error

We designed a board with the Cyclone 10 GX (10CX105YF780E5G) and we're attempting to configure the FPGA using JTAG as part of the board bring-up process. While Quartus Programmer reports 100% Succes...
Board Debug
Configuration
FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi KeeganJ,


I apologize for missing your post. Thank you for the update. We're pleased to learn that the configuration issue has been resolved by substituting the LED and 100-ohm resistor with a 10k pull-up resistor in line with the design guidelines. Consequently, I'll now shift this discussion to community support. Should you have a new question, please initiate a new thread for assistance from Intel experts. Alternatively, the community users will be available to assist you on this existing thread. Thank you.


Regards,

Fakhrul


Recent Discussions