Forum Discussion

New Contributor

2 years ago

Solved

customizing soc_system.rbf for cyclone V

Hello all, I am trying to change the soc_system.rbf from the GSRD to a customized one. The only differences between the FPGA designs are: 1. The SYSID has been modified. 2. The original rbf size ...

Configuration

tehjingy_Altera
1 year ago
Hi

The steps you shared is getting the sd card image from the pre built source.
That is why you are seeing the old sysID still present.
Could you please follow the steps below :
https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10#Cyclone_V_SoC_45_Boot_from_SD_Card

Section " C. Prepare SD Card Image"

From the steps above you will pack the newly created rbf into the SD Card.

Regards
Jingyang, Teh